If you On-Site Waste treatment system is failing you need help -- quickly.
The first item you need to do is to have your current septic tank pumped out.
Next is to contact you local township Chief Building Official (CBO) and discuss the problem with the authorities.
Most CBO's will allow you to install the WaterClean Machine when the current system is failing.
This will avoid the time and expense it takes to remove the old biomass (the dirt which is used to absorb the discharge water). Then truck in new sand, etc to make a new absorbtion bed. Then install a new tank if the old tank is leaking. This takes time and can make a real mess in your back yard with a backhoe and the big truck required to get all this work done.
If you choose to install a WaterClean Machine you can avoid all this time and expense.
After the Chief Building Offical approves the use of a WaterClean Machine and your old tank has been pumped the WaterClean Machine can be installed in one day by two men and will be capable of processing sewage water when they leave. All in one day!!
How is this possible? The WaterClean Machine is built and tested in the factory and is ready to operate when shipped. The machine requires a separate 220V, 30 amp ground fault interupter protected electrical supply. Also a sewage pump needs to be installed in the secondary chamber of the existing septic tank and some piping to get the sewage to the WaterClean Machine. The machine requires a water discharge line that will either take the cleaned water to a storage tank for reuse or to the existing tile bed for discharge into the earth.
If you current tile bed is failing it can still be used because the water processed by the new WaterClean Machine has been disinfected and denutrified so you are discharging clean water into the ground. The old tile bed will actually regenerate itself over the next 6 to 12 months because it is no longer required to process the dirty water discharged from all conventional septic systems. The clean water discharged by the WaterClean Machine will help to restore the old biomass along with the natural biodegradable action that occurs in the earth.
The WaterClean Machine installation company will in most cases be a local small business that has been providing conventional septic systems in your area for years. This company has been trained in the installation and maintenance of the WaterClean Machine. They will make periodic service calls to check your system to make sure it continues to operate properly and to change the filters.
The WaterClean Machine requires a annual service and maintenance contract. This contract is required to insure that you new WaterClean sewage processing system will operate trouble free for many years.
To order a WaterClean Machine simply fill out the information page and a WaterClean representative will contact you to provide more information and pricing.
To view a complete video about the Waterclean Technology and it capabilities click on this link to uTube: http://www.youtube.com/watch?v=gfeRW67b9cU&feature=youtu.be
The first item you need to do is to have your current septic tank pumped out.
Next is to contact you local township Chief Building Official (CBO) and discuss the problem with the authorities.
Most CBO's will allow you to install the WaterClean Machine when the current system is failing.
This will avoid the time and expense it takes to remove the old biomass (the dirt which is used to absorb the discharge water). Then truck in new sand, etc to make a new absorbtion bed. Then install a new tank if the old tank is leaking. This takes time and can make a real mess in your back yard with a backhoe and the big truck required to get all this work done.
If you choose to install a WaterClean Machine you can avoid all this time and expense.
After the Chief Building Offical approves the use of a WaterClean Machine and your old tank has been pumped the WaterClean Machine can be installed in one day by two men and will be capable of processing sewage water when they leave. All in one day!!
How is this possible? The WaterClean Machine is built and tested in the factory and is ready to operate when shipped. The machine requires a separate 220V, 30 amp ground fault interupter protected electrical supply. Also a sewage pump needs to be installed in the secondary chamber of the existing septic tank and some piping to get the sewage to the WaterClean Machine. The machine requires a water discharge line that will either take the cleaned water to a storage tank for reuse or to the existing tile bed for discharge into the earth.
If you current tile bed is failing it can still be used because the water processed by the new WaterClean Machine has been disinfected and denutrified so you are discharging clean water into the ground. The old tile bed will actually regenerate itself over the next 6 to 12 months because it is no longer required to process the dirty water discharged from all conventional septic systems. The clean water discharged by the WaterClean Machine will help to restore the old biomass along with the natural biodegradable action that occurs in the earth.
The WaterClean Machine installation company will in most cases be a local small business that has been providing conventional septic systems in your area for years. This company has been trained in the installation and maintenance of the WaterClean Machine. They will make periodic service calls to check your system to make sure it continues to operate properly and to change the filters.
The WaterClean Machine requires a annual service and maintenance contract. This contract is required to insure that you new WaterClean sewage processing system will operate trouble free for many years.
To order a WaterClean Machine simply fill out the information page and a WaterClean representative will contact you to provide more information and pricing.
To view a complete video about the Waterclean Technology and it capabilities click on this link to uTube: http://www.youtube.com/watch?v=gfeRW67b9cU&feature=youtu.be